GEFRAN-SIEI ARTDrive Vector V2 Series - Page 195

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 195
E02.03 Flx I base value [A/Wb/s] RWS Calc 0.00/Calc FK F-S Full 2022
Basic value of the integral gain of flux loop.
E03 REG PARAM / Volt Reg
NOTE! Menu accessible with Access Level = FULL.
E03.00 Vlt P gain % [%] RWS Calc 0.00/100 PP F-S-B Full 2031
Proportional gain of voltage loop.
E03.01 Vlt I gain % [%] RWS Calc 0.00/100 PP F-S-B Full 2033
Integral gain of voltage loop.
E03.02 Vlt P base value [A/V] RWS Calc 0.00/0.00 FK F-S-B Full 2039
Basic value of the proportional gain of voltage loop.
E03.03 Vlt I base value [A/V/s] RWS Calc 0.00/0.00 FK F-S-B Full 2041
Basic value of the integral gain of voltage loop.