GEFRAN-SIEI ARTDrive Vector V2 Series - Page 208

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
Chapter 6 Parameter • 208 ARTDrive V2 series - Instruction Manual
Switch is closed if Ramp out enable = Disabled & Stop
2. Switch is closed if Ramp out enable = Disabled & (!FastStop)
Switch is closed if Ramp out enable = Disabled & (FastStop)
Both switches are closed if Ramp out enable = Enabled
F00 SPEED REG / Speed ref
F00.00 Speed ref 1 src N/A RWS Ipa7040 PList 9 PIN V-F-S-B Full 7050
Ipa 7040 - Dig spd ref 1 = Default
It select the origin of the signal of Speed reference 1.
ªª
ªª
ª
Pick List 9
F00.01 Speed ref 2 src N/A RWS Ipa7041 PList 10 PIN V-F-S-B Full 7051
Ipa 7041 - Dig spd ref 2 = Default
It select the origin of the signal of Speed reference 1.
ªª
ªª
ª
Pick List 10
F00.02 Speed ratio src N/A RWS Ipa7044 PList 13 PIN V-F-S-B Full 7052
Ipa 7044 - Dig SpdRatio = Default
It select the origin of the signal of Speed ratio.
ªª
ªª
ª
Pick List 3
F00.03 Speedref inv src N/A RWS Ipa4000 PList 3 PIN V-F-S-B Full 7053
Ipa 4000 - NULL = Default
It connects the selected signal to the selector of the multiplier input: if the signal is 0,
multiply by +1, or if the signal is 1, multiply by -1. The multiplier allows to invert Speed
reference signal.
ªª
ªª
ª
Pick List 3
F00.10 Dig spd ref 1 [rpm] RWS 0 Calc/Calc PV V-F-S-B Full 7040
Value of the Digital speed reference 1 variable, selectable through Pick List 9 of F00.00 -
Speed ref 1 src.
ªª
ªª
ª
Pick List 9