GEFRAN-SIEI ARTDrive Vector V2 Series - Page 209

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 209
F00.11 Dig spd ref 2 [rpm] RWS 0 Calc/Calc PV V-F-S-B Full 7041
Value of the Digital speed reference 2 variable, selectable through Pick List 10 of F00.01 -
Speed ref 2 src.
ªª
ªª
ª
Pick List 10
F00.12 Speed top [rpm] RWS 2000 Calc/Calc PV V-F-S-B Easy 7042
Maximum limit of drive speed reference.
F00.13 Speed bottom [rpm] RWS -2000 Calc/Calc PV V-F-S-B Easy 7043
Minimum limit of drive speed reference.
F00.20 Ramp out mon [rpm] R 0.00 0.00/0.00 PV V-F-S-B Full 8022
Displaying of Ramp output signal.
F00.30 Speed ref 1 mon [rpm] R 0.00 0.00/0.00 PP V-F-S-B Full 7045
It displays of the Speed ref 1 signal.
F00.31 Speed ref 2 mon [rpm] R 0.00 0.00/0.00 PP V-F-S-B Full 7046
It displays of the Speed ref 2 signal.
F00.40 Jog output [rpm] R 0.00 0.00/0.00 PV V-F-S-B Full 8012
It displays of the Jog output signal.
F00.50 Spd Draw out [rpm] R 0.00 0.00/0.00 PV V-F-S-B Full 7099
It displays of the Speed draw output signal.
F00.51 Speed lim stat N/A R 0 0/1 PV V-F-S-B Full 7049
It displays of the Speed limit state:
0 = Not active
1 = Active
F00.52 Speed setpoint [rpm] R 0.00 0.00/0.00 PV V-F-S-B Easy 7047
It displays of the Speed reference (setpoint) output signal.