GEFRAN-SIEI ARTDrive Vector V2 Series - Page 230

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
Chapter 6 Parameter • 230 ARTDrive V2 series - Instruction Manual
· [5] Negative SpdTrq Saturating the speed regulator output negative, the sum of Torque ref 1 +
Torque ref 3 can be positive or negative.
The sum of Torque ref 1 + Torque ref 3 will be Torque ref unless the Speed
regulator output is more positive than the sum Torque ref 1 + Torque ref 3.
If sum of Torque ref 1 + Torque ref 3 is positive, while the Speed regulator
output is negative, an external control may be needed to keep from motor
overspeed in the positive direction, during a material break or slippage.
G00.20 Torque ref 1 mon [Nm] R 0.00 0.00/- PP F-S-B Full 2432
Torque reference 1 signal displaying.
G00.21 Torque ref 2 mon [Nm] R 0.00 0.00/- PP F-S-B Full 2442
Torque reference 2 signal displaying
G00.22 Torque ref 3 mon [Nm] R 0.00 0.00/- PP F-S-B Full 2443
Torque reference 3 signal displaying
G00.23 Torque ref [Nm] R 0.00 0.00/- PP F-S-B Easy 2450
Output Torque reference signal displaying
G00.24 SpdTrq ctrl [Nm] R 0 0/1 DV F-S-B Easy 2446
It displays of the Speed Torque control state:
0 = Speed
1 = Torque
G00.25 SpdTrq mode mon N/A R 0 0/- DP F-S-B Easy 2448
It displays of the Speed Torque mode