GEFRAN-SIEI ARTDrive Vector V2 Series - Page 290

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
Chapter 6 Parameter • 290 ARTDrive V2 series - Instruction Manual
O02.15 PID acc time [sec] RWS 1.00 Calc/900 PP V-F-S-B Full 7237
Acceleration time from 0 to 16384 counts (Normalized internal value).
O02.16 PID dec time [sec] RWS 1.00 Calc/900 PP V-F-S-B Full 7238
Deceleration time from 0 to 16384 counts (Normalized internal value).
O02.17 PID clamp bot [%] RWS -200 -200/200 PV V-F-S-B Full 7239
Lower clamp value (see dynamic clamp).
O02.18 PID clamp top [%] RWS 200 -200/200 PV V-F-S-B Full 7240
Upper clamp value (see dynamic clamp).
O02.20 PID fbk mon [%] R 0.00 -200/200 PP V-F-S-B Full 7250
Monitor for the feedback value (reaction)
O02.21 PID draw mon [%] R 0.00 -200/200 PP V-F-S-B Full 7251
Monitor for the active Draw value.
O02.22 PID set 0 mon [%] R 0.00 -200/200 PP V-F-S-B Full 7252
Monitor for the digital Setpoint 0 value.
O02.23 PID set 1 mon [%] R 0.00 -200/200 PP V-F-S-B Full 7253
Monitor for the digital Setpoint 1 value.
O02.24 PID input [%] R 0.00 -200/200 PV V-F-S-B Full 7256
Monitor for the block output value.