GEFRAN-SIEI ARTDrive Vector V2 Series - Page 289

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 289
Source selection of the Draw (tension) reference.
ªª
ªª
ª
Pick List 33
O02.02 PID set 0 src N/A RWS Ipa7232 PList 34 PIN V-F-S-B Full 7222
Ipa 7232 - Dig PID set 0 = Default
Setpoint 0 (reference) source selection.
ªª
ªª
ª
Pick List 34
O02.03 PID set 1 src N/A RWS Ipa7233 PList 35 PIN V-F-S-B Full 7223
Ipa 7233 - Dig PID set 1 = Default
Setpoint 1 (reference) source selection.
ªª
ªª
ª
Pick List 35
O02.04 PID seloff 0 src N/A RWS Ipa4000 PList 3 PIN V-F-S-B Full 7226
Ipa 4000 - NULL = Default.
Source selection of the Setpoint selector.
ªª
ªª
ª
Pick List 3
O02.10 Dig PID fbk [%] RWS 0.00 -200/200 PV V-F-S-B Full 7230
Internal digital value of the PID section reaction.
O02.11 Dig PID draw [%] RWS 0.00 -200/200 PV V-F-S-B Full 7231
PID Draw digital internal value.
O02.12 Dig PID set 0 [%] RWS 0.00 -200/200 PV V-F-S-B Full 7232
Digital Setpoint 0 internal value.
O02.13 Dig PID set 1 [%] RWS 0.00 -200/200 PV V-F-S-B Full 7233
Digital Setpoint 1 internal value.
O02.14 PID gain draw NULL RWS 1.00 -16/16 PV V-F-S-B Full 7236
Digital value of the Setpoint adapting gain (feedback).