GEFRAN-SIEI ARTDrive Vector V2 Series - Page 295

Index
MENUMENU
MENUMENU
MENU [Unit] Access Default Min/Max Format Reg.Mode Level Ipa
Parameter Name
Description
ARTDrive V2 series - Instruction Manual Chapter 6 Parameter • 295
O03.25 Dig PIGP ref [%] RWS 0.00 -200/200 PP V-F-S-B Full 7281
Digital reference for input signal of gain adaptive
O03.26 PI Pinit gain [%] RWS 10 0.00/100 PP V-F-S-B Full 7290
Proportional starting gain PI section.
O03.27 PI Iinit gain [%] RWS 10 0.00/100 PP V-F-S-B Full 7291
Integral starting gain PI section.
O03.28 PI clamp top NULL RWS 1.00 -16/16 PP V-F-S-B Full 7292
PI upper conversion value.
O03.29 PI clamp bot NULL RWS -1.00 -16/16 PP V-F-S-B Full 7293
PI lower conversion value.
O03.30 Dig PID Mlt PI 1 NULL RWS 0.00 -16/16 PP V-F-S-B Full 7324
Digital value of the Multiplier 1.
O03.31 Dig PID Mlt PI 2 NULL RWS 0.00 -16/16 PP V-F-S-B Full 7325
Digital value of the Multiplier 2.
O03.32 Dig PID Mlt PI 3 NULL RWS 0.00 -16/16 PP V-F-S-B Full 7326
Digital value of the Multiplier 3.
O03.40 PID PI lock mon N/A R 0 0/1 DV V-F-S-B Full 7265
Monitor lock PI section:
0 = Unlack
1 = Lack
O03.41 PIGP ref mon [%] R 0.00 -200/200 PP V-F-S-B Full 7282
Reference monitor of the gain adaptive.
O03.42 PI Pnorm gain [%] R 0.00 0.00/100 PP V-F-S-B Full 7283
Proportional PI gain normalized.
O03.43 PI Inorm gain [%] R 0.00 0.00/100 PP V-F-S-B Full 7284
Integral PI gain normalized.