GeoMax Zoom10 User Manual

7 Functions
7.1 Overview
Functions can be accessed by pressing FNC from any measurement screen. FNC opens the func-
tions menu and a function can be selected and activated.
Function Description
Level Activates the laser plummet and electronic level. Refer to "Elec-
tronic level and laser plummet".
Offset Starts the function Offset. Refer to "7.2 Offset".
NP/P Changes between prism and non-prism mode.
HT. Transfer Starts the function Height Transfer. Refer to "7.3 Height Trans-
fer".
Hidden Point Starts the function Hidden Point. Refer to "7.4 Hidden Point".
Free Coding Refer to "7.5 Coding".
Laser Activates/deactivates the visible laser beam for illuminating the
target point.
Light Activates and deactivates the screen illumination light.
Unit Setting Allows to quickly change the units for angles, distances, tempera-
ture and pressure.
Main Setting Allows to quickly change the most important hardware settings.
For changing all settings, refer to "5.1 General Settings".
EDM Tracking Activates/deactivates the EDM tracking mode.
On To activate the compensator. Vertical
angles refer to the plummet line, and
the horizontal directions are corrected
by the vertical-axis tilt.
Off To deactivate the compensator.
X Only To activate the compensator for X direc-
tion only. Vertical angles refer to the
plummet line.
OK To turn off laser plummet and exit the
electronic level screen.
☞
The electronic level can be used to level up the instrument precisely using the foot-
screws of the tribrach.
☞
The laser plummet is turned on automatically when entering the electronic level
screen. Press the UP/DOWN keys to adjust the brightness of the laser plummet.
☞
If the instrument is used on an unstable base, for example a shaking platform or
ship, deactivate the compensator. Otherwise, the compensator might drift out of its
measuring range and interrupt the measuring process by indicating an error.
7.2 Offset
7.2.1 Distance Offset
This function calculates the target point coordinates if it is not possible to set up the reflector, or
to aim at the target point directly. The offset values (length, trav. and/or height offset) can be
entered. The values for the angles and distances are calculated to determine the target point.
Description
Functions
Electronic level and laser
plummet
Description
Functions 37

GeoMax Zoom10 Specifications

General

Brand	GeoMax
Model	Zoom10
Category	Measuring Instruments
Language	English