10 Data Management
10.1 Overview
1. Select Manage (3) from the Main Menu.
2. To select an application in the Manage menu, press a function key, F1 - F4.
To toggle through the available screens, press the PAGE key.
•
To manage jobs, select Job (1). Refer to "10.2 Managing Jobs".
•
To manage fix points, select Fix Pt. (2). Refer to "10.3 Managing Fix Points".
•
To manage measurement data, select Meas. PT (3). Refer to "10.4 Managing Meas-
urement Data".
•
To manage codes, select Code (4). Refer to "10.5 Managing Codes".
•
To display memory info or format the memory, select Mem. Stat. (5). Refer to "10.6
Managing Memory Space".
Menu item Description
Job To view, create and delete jobs. Jobs are a summary of data of different
types, for example, known points, measurements or codes. The job defini-
tion consists of the job name and user. The system generates time and
date at the time of creation.
Fix Pt. To view, create, edit and delete fixpoints. Valid fixed points contain at least
the point ID and the coordinates E, N or H.
Meas. PT To view and delete measurement data. Measurement data available in the
internal memory can be searched for via a specific point search, or by
viewing all points within a job.
Code To view, create, edit and delete codes. To each code a description and a
maximum of 8 attributes with up to 12 characters each can be assigned.
Mem. Stat. To display the memory usage for internal memory or external memory, if
an SD card is inserted.
To format the internal memory.
☞
Deleting the memory cannot be undone. After confirming the
message all data is permanently deleted.
Access
Data Manager menu
84 Data Management
To Next Page
Loading...
Need help?
General
