GeoMax Zoom10 User Manual

RS232C port
Job To select the target job.
Import To start the import process.
USB port
Job To select the target job.
Source To select the data file to be imported.
Import To start the import process.
Importing code data
You can import code data to the internal memory using the RS232C port only.
1. To import code data, select Code Data (2) from the Import menu.
2. Connect the instrument to the computer using the RS232C cable.
3. Start the transfer software on the computer and press Send.
4. To start import process, press Import.
The code data are added to the code library.
11.3 Exporting Data
Exporting job data
You can export job data ‐that is, fix points or measurement data ‐ from the internal memory
either using the USB port or the RS232C port.
1. To export job data, select Job Data (1) from the Export menu.
☞
Do not insert or pull out a UDisk while the transfer application is running, as this
might cause an error in the software.
Insert the UDisk before selecting the export method "UDisk".
2. To select the export method, select the field "Mode" and press the LEFT/RIGHT
keys.
3. For RS232C:
•
To define the job to be exported, press Job.
•
To select the data to be exported, select the field "Data Type" and press the
LEFT/RIGHT keys.
•
Connect the instrument to the computer using the RS232C cable.
•
Start the transfer software on the computer.
For UDisk:
•
To define the job to be exported, press Job.
•
To select the data to be exported, select the field "Data Type" and press the
LEFT/RIGHT keys.
•
To select the file format, select the field "Format" and press the LEFT/RIGHT
keys.
4. Press Export to start export process.
Exporting job or code data
88 Data Transfer

GeoMax Zoom10 Specifications

General

Brand	GeoMax
Model	Zoom10
Category	Measuring Instruments
Language	English