11 Data Transfer
11.1 Overview
1. Select Transfer (4) from the Main Menu.
2. To select an application in the Transfer menu, press a function key, F1 or F2.
•
To open the Import menu, select Import (1). Refer to "11.2 Importing Data".
•
To open the Export menu, select Export (2). Refer to "11.3 Exporting Data".
The Transfer function allows data transfer between instrument and a computer, using the
RS232C port, or between instrument and a removable storage device (UDisk) using the USB
port.
☞
For UDisks, the instrument supports up to 8GB of read/write performance. Do not
insert or pull out a UDisk while the transfer application is running, as this might cause
an error in the software.
Importable data formats
•
GSI
•
CSV
•
GTS-7
•
CASS
Exportable data formats
•
GSI
•
CSV
•
GTS-7
•
CASS
•
HTF
11.2 Importing Data
Importing fix point data
You can import fix point data to the internal memory either using the USB port or the RS232C
port.
1. To import fix point data, select Fix Pt. (1) from the Import menu.
☞
Do not insert or pull out a UDisk while the transfer application is running, as this
might cause an error in the software.
Insert the UDisk before selecting the import method "UDisk".
2. To select the import method, press the LEFT/RIGHT keys.
3. For RS232C:
•
To define the target job to which the imported fix points should be added,
press Job.
•
Connect the instrument to the computer using the RS232C cable.
•
Start the transfer software on the computer and press Send.
For UDisk:
•
To select the data file to be imported from the UDisk, press Source.
•
To select the file format, select the field "Format" and press the LEFT/RIGHT
keys.
•
To define the target job to which the imported fix points should be added,
press Job.
4. To start import process, press Import.
When import process is finished, the number of imported fix points is displayed.
Access
Description
Importing fix point or
code data
Data Transfer 87
To Next Page
Loading...
Need help?
General
