EasyManua.ls Logo

GeoMax Zoom10 - Angle Measurement; Distance Measurement with Reflectors; Distance Measurements Without Reflectors (Reflectorless Mode)

GeoMax Zoom10
106 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Centring Accuracy: 1 mm at 1.5 m instrument height.
Battery Type: Rechargeable Li-Ion battery
Voltage/Capacity: ZBA10: 7.4 V DC/3000 mAh
Operating time with ZBA10:
16 h
*
(optimal) - continuous angle measurement every
30 s
10 h (typical)
Measuring times: About 12000 times
*
New battery at 25°C, 24 h continuously angle measurement mode
Temperature
Type Operating temperature Storage temperature
[°C] [°F] [°C] [°F]
Instrument -20 to +50 -4 to +122 -40 to +70 -40 to +158
Battery -20 to +50 -4 to +122 -40 to +70 -40 to +158
Protection against water, dust and sand
Type Protection
Instrument IP54 (IEC 60529)
14.2 Angle Measurement
Measurement Method: Absolute Encoding
Minimum Readout: 1''/5''/10'' (0.3 mgon/1.5 mgon/3 mgon)
Accuracy
*
:
2''
*
Accuracy with standard deviation based on ISO 17123-3.
14.3 Distance Measurement with Reflectors
Reflector Range
Single prism
3000 m under good condition
*
Three prisms
6000 m under good condition
*
Reflective sheet 800 m
*
Good condition: no haze, visibility about 40 km, moderate sunlight.
Accuracy: 2 mm + 2 ppm
Measuring time (Fine/Quick/Track-
ing):
1.5 s/1 s/0.5 s
14.4 Distance Measurements without Reflectors (Reflectorless mode)
Reflectorless distance measurement requires laser class 3R.
Power supply
Environmental specifica-
tions
96 Technical Data

Table of Contents

Other manuals for GeoMax Zoom10

Related product manuals