Getinge Maquet FLOW-i 4.2 User Manual

- Contacts of fuse holders that are
accessible during replacement of the
fuse.
- Contacts of lamp holders that are
accessible after removal of the lamp.
- Parts inside access covers that can be
opened without the use of a tool, e.g.
patient cassette lid connector.
WARNINGS!
• In case of system failure, the lack of
immediate access to appropriate
alternative means of ventilation can result
in patient injury.
• Gas inlets and outlets shall not be
covered or in any other way be
obstructed.
• FLOW-i is not designed to be resistant
to direct exposure to high ionizing
radiation. Such exposure may result in
memory erasure and/or interruption of
ventilation.
2.4 Installation and service
• Installation, service and maintenance of the
system must be performed by personnel
trained and authorized by MAQUET.
• Instructions for installation, service and
maintenance, i.e. a service manual, is
available for personnel trained and
authorized by MAQUET.
• Only original spare parts from MAQUET
must be used in the system.
FLOW-i 4.2, User's Manual
13
| Important |
2 |

Getinge Maquet FLOW-i 4.2 Specifications

General

Brand	Getinge
Model	Maquet FLOW-i 4.2
Category	Medical Equipment
Language	English