Getinge Maquet FLOW-i 4.2 User Manual

12.13 Preventive maintenance
MAQUET recommends that the system,
associated parts and auxiliary equipment is
inspected regularly for wear and damages.
Preventive maintenance and calibration of the
system must be performed by personnel
trained and authorized by MAQUET at least
once a year, or every 5000 hours of operation,
whichever comes first. The Status menu on
the control panel shows the current operating
time.
Service repair must be performed by personnel
trained and authorized by MAQUET.
All technical documentation is available for
use by MAQUET authorized personnel.
Original parts from MAQUET must be used.
12.14 MCare Remote Services
12.14.1 General information
When initiated, MCare remote services
transfers information stored in the system to
a remote MCare server located at a central
facility.
This enables service personnel to evaluate the
system off-site and perform
troubleshooting/rudimentary maintenance. It
also prepares visiting service personnel for
system service.
The transferred information consists of the
following:
• All logs
• Startup configuration
12.14.2 Preparations
Make sure the network cable is connected to
the network connection port on the system
(1).
1
262
FLOW-i 4.2, User's Manual
| 12
| Routine cleaning and maintenance |

Getinge Maquet FLOW-i 4.2 Specifications

General

Brand	Getinge
Model	Maquet FLOW-i 4.2
Category	Medical Equipment
Language	English