4.2 System checkout
01-01 13 00
1 2
A prompt to start the System checkout
procedure is automatically displayed at system
startup:
1. Bypass the System checkout
2. Start the System checkout
The System checkout can also be initiated via
the Menu membrane button during Standby,
see Chapter 9, page 166.
The procedure includes the following main
areas:
• Preparations
• Checks requiring user interaction
• Automatic checks
To ensure correct system functionality, optimal
performance and patient safety, the System
checkout procedure must be performed as
follows:
• Once a day, or before connecting the first
patient within a running 24 hour period.
• After replacing the patient cassette.
• After the system has been transported.
If the system needs to be used immediately,
i.e. during an emergency, values and results
from the last successful System checkout
remain in effect.
Press the Start touch pad in the System
checkout window to begin the procedure.
FLOW-i 4.2, User's Manual
49
| Startup and system checkout |
4 |
To Next Page
Loading...
Need help?
General
