Getinge Maquet FLOW-i 4.2 User Manual

3.10 Storage and transportation
3.10.1 Before transport
• If the system is to be moved to another
room or transported a longer distance,
ensure mounted accessories are securely
attached to the system.
• The C40 system is intended for transport
inside the operation room only when
undocked from the ceiling pendant.
Transportation to other locations requires
the use of a suitable cart or trolley
according to hospital routines.
CAUTION: Make sure extra equipment and
accessories, e.g. support arm and
additional table, are folded close to the
system during transport to minimize the risk
of tipping. The display arm should be
positioned as shown in the illustration.
3.10.2 During transport
• Move the system using the handles on the
main unit and not those on the control panel
or patient monitor. This will reduce the risk
of tipping and/or system damage.
• If the optional extra table is installed, make
sure it is folded into a vertical position.
• Be careful when moving the system down
a slope.
38
FLOW-i 4.2, User's Manual
| 3
| System overview |

Getinge Maquet FLOW-i 4.2 Specifications

General

Brand	Getinge
Model	Maquet FLOW-i 4.2
Category	Medical Equipment
Language	English