12.11 System checkout
Dismantle
Wipe off/discard
Rinse
DryDisinfectant
Rinse
Washer-
disinfector
Dry
Assemble
System checkout
Steam
autoclave
After cleaning, always perform a System
checkout. See Chapter 4.
If the System checkout fails due to unknown
reasons, repeat the forced ventilation drying
process described in 11.9, page 253. Repeat
the System checkout.
12.12 Cleaning accessories and
auxiliary equipment
When the accessories and/or auxiliary
equipment are not covered by the MAQUET
CE mark on the anesthesia system, refer to
cleaning instructions found in the equipment's
user documentation.
FLOW-i 4.2, User's Manual
261
| Routine cleaning and maintenance |
12 |