Getinge Volista - From the Touchscreen Control Panel

Use
Controlling the light
4
VOLISTA
IFU 01781 EN 19
47 / 106
4.2.3.2 From the touchscreen control panel
1
2 3 4
Fig.47: Ambient light from the touchscreen control panel
Enabling ambient light mode
1. From the lighthead page, press the Standard/ambient light 1 button.
Ø When enabled, the button is blue.
Adjusting the light intensity of the ambient light
1. From the lighthead page, press the Standard/ambient light 1 button.
Ø When enabled, the button is blue.
2. Press Plus 4 to increase the illumination level of the lighthead(s) 3 .
3. Press Minus 2 to decrease the illumination level of the lighthead(s) 3 .