Getinge Volista - Use; Daily inspections

Use
Daily inspections
4
VOLISTA
IFU 01781 EN 19
37 / 106
4 Use
4.1 Daily inspections
NOTE
To ensure that the product used is compliant, various daily visual and functional in-
spections must be performed by trained personnel. It is recommended that records
be kept of the results of these inspections, along with the date and signature of the
person performing them.
Fig.28: Integrity of the device
Integrity of the device
1. Check that the device has not suffered any
impact damage.
2. Check for any chipped or missing paint.
3. If a problem is noted, contact technical
support.
Fig.29: Suspension covers
Suspension covers
1. Check that the spring arm covers are in
the proper position and in good condition.
2. Check that the suspension covers, includ-
ing the one beneath the central shaft, are
in the proper position and in good condi-
tion.
3. If a problem is noted, contact technical
support.
DF
SF
Fig.30: Half-rings on spring arms
Half-rings on spring arms
1. Check that the half-rings on the spring
arms are in place in their slots.
2. If a problem is noted, contact technical
support.