Getinge Volista - Installing and Removing the STG HLX Sterilisable Handle

Use
Positioning the light
4
VOLISTA
IFU 01781 EN 19
57 / 106
Fig.56: Removing the STGPSX sterilisable
handle
Removing the sterilisable handle from a
lighthead
1. Press the locking button.
2. Remove the handle.
4.3.1.2 Installing and removing the STG HLX sterilisable handle
Fig.57: Installing the STGHLX sterilisable handle
Installing a sterilisable handle on the light-
head
1. Inspect the handle and check for cracks or
soiling.
2. Fit the handle to the mount.
3. Rotate the handle until its rotation is
locked.
Ø The locking button pops out of its hous-
ing.
Ø The handle is now locked in place and
ready for use.
Fig.58: Removing the STGHLX sterilisable
handle
Removing the sterilisable handle from a
lighthead
1. Press the locking button.
2. Remove the handle.