Operation
Manual 20791, Rev. C, June 2001 2-9
Start, Center, CW Frequency
Shows the frequency mode currently in use (STRT, CNTR, or CW), and the frequency selected to be
used with that mode.
Reference Position Indication
This area shows the selected frequency reference point for each channel being displayed
(channels 1 and 2 in Figure 2-2). The power level being used as reference is given in the REF section of
each channel summary area.
Message Area
This area of the display shows any special messages pertaining to the current measurement.
Active Entry Area/Main Titles
Shows the function currently being used, and the most important parameters of interest associated with
that function.
Channel Summary Area
The Channel Summary Area displays the parameters to be used with the designated channel for the
current measurement. The front panel function keys are used initially to call up the desired menus
which define these parameters. This means that each function key will define different parameters,
causing different information to be displayed in the Summary Area depending on the function key being
used.
To Next Page
Loading...
