8003 Precision Scalar Analyzer
2-32 Manual 20791, Rev. C, June 2001
[
UNITS
]
Menu F3: Selects the units (dB or W) in which the measurement on the entry channel will be dis-
played. The menu will change to Menu F3-11.
This key is active only in the CW mode. This is because swept mode data is always displayed in log-
arithmic (dB or dBm) units.
[
LOG
]
Menu F3-11: Changes the displayed measurements to dB or dBm as appropriate.
[
LINEAR
]
Menu F3-11: Changes the displayed measurements to units of mW or some other dimension of
Watts.
[
GRAPH/READOUT
]
Menu F3: Toggles between displaying the results of a measurement in either graphic or alphanu-
meric readout format.
To Next Page
Loading...
