Introduction
1
1-2 Gilson 157/159 UV-VIS Detectors User’s Guide
Unpacking
Unpacking
The detector is delivered with most of the major components already assembled. Retain all packing material so
the detector may be shipped safely in the future.
To unpack the detector:
1 Open the box.
2 Remove the accessory box.
3 Remove the foam insert on the top of the detector.
4 Grip the detector and lift it out of the packaging.
5 Remove the protective film from the touchscreen. It prevents scratches during shipping.
Standard Equipment
• 157 UV-VIS Detector or 159 UV-VIS Detector with test cell
• Power cord (110V)
• Ethernet cable
•Test Results
• Other items that will not be used
Accessories
Required
Some accessories are required, but are ordered separately:
• Standard Parts Package, which includes
• Power cord (220V)
• Installation Qualification (IQ) Procedure 157/159 UV-VIS Detectors
• Declaration of Conformity
• Gilson 157/159 UV-VIS Detectors Documentation CD, which includes
• Gilson 157 UV-VIS Detector User's Guide
• Gilson 159 UV-VIS Detector User's Guide
• Installation Qualification (IQ) Procedure 157/159 UV-VIS Detectors
• Plumbing Package, which includes:
• Flow cell inlet and outlet tubing
• Fittings for connecting the column outlet to the detector inlet tubing
• Fittings for connecting the outlet tubing to a back pressure regulator, fraction collector, or waste
container
• Couplers (optional)
Optional
The following optional accessories are also available:
• Flow cells
• Shelf for stacking the detector with a Gilson pumping system
To Next Page
Loading...
