GRAPHTEC FC 4500 Series - 6.22 Y Belt

FC4500-UM-251-9370 35
6 REPLACEMENT PROCEDURES
(5) Remove the two M3L6 binding head screws holding the Registration Mark Sensor, and then detach
the Registration Mark Sensor. (Remove the four M3L6 binding head screws holding the Registration
Mark Sensor for the Registration Mark Sensor of FC4510-60.)
FC4500-50 / FC4500-60
M3L6 binding head screw
Registration mark sensor
FC4510-60
M3L6 binding head screw
Registration mark sensor