7-16
Operation
1
Press the [COND/TEST] key.
CONDITION setting screen (1/3) is displayed.
Supplement
It will return to default screen without changing
the settings when you press the [CONDITION]
key.
2
Press the POSITION ( ) key.
CONDITION setting screen (3/3) is displayed.
3
Press the [3] key (CUT LINE PATTERN).
CUT LINE PATTERN screen is displayed.
4
Press the [1] key (Condition No.).
CONDITION No. screen is displayed.
5
Press the POSITION ( ) key and select the CONDITION
No.
6
&RQÀUPWKHVHWWLQJDQGSUHVVWKH>(6&@NH\35(9,286
CONDITION No. will be selected and it will return to CUT LINE
PATTERN screen.
To Next Page
Loading...
