12-12
12.6
Skew Scanning
When continuous operation is performed, it is possible to set how much skew allowed by detecting media skew by
comparing the start mark positions of the start page and the current page.
For continuous operation, see “Application of barcode cut (continuous operation)”.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the POSITION (
) key (LINK).
DATA LINK screen (1/2) is displayed.
3
Press the POSITION ( ) key.
DATA LINK screen (2/2) is displayed.
4
Press the [3] key (AUTOMATIC SKEW DETECTION).
AUTOMATIC SKEW DETECTION screen is displayed.
Supplement
During continuous operation, you can select
from 5 mm, 10 mm or 15 mm for the skew
tolerance.
5
Press the [1] key (5 mm), the [2] key (10 mm) or the [3] key (15
mm).
To Next Page
Loading...
