GRAPHTEC FC9000-140 - LCD Contrast Setting (LCD CONTRAST)

10-12
LCD contrast setting (LCD CONTRAST)
You can set the contrast of the LCD display on the control panel.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE screen (1/4) is displayed.
3
Press the POSITION ( ) key twice.
ADVANCE screen (3/4) is displayed.
4
Press the [4] key (LCD CONTRAST)
LCD CONTRAST screen is displayed.
Supplement
You can set the range between -30 and 30 (5-
step).
5
Press the POSITION ( ) keys and increase or decrease
the setting value.
Supplement
It will return to ADVANCE screen (3/4) without
changing the settings when you press the [ESC]
key (CANCEL).
6
&RQÀUPWKHVHWWLQJDQGSUHVVWKH>(17(5@NH\6(7
Setting will be confirmed and it will return to ADVANCE screen (3/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.