3-3
3.2
Move the Tool Carriage and Media
Tool carriage and media can be moved manually using the POSITION key.
It also can move the tool carriage and media to the origin, or move it certain distance to keep it away.
Move in steps manually
It can manually move in steps when the screen is displaying "READY", or when the POSITION (
) key is
displayed.
Operation
Supplement
It will move in steps every time POSITION (
) key is pressed.
Distance of step movement can be changed.
See "Setting of Step Movement Distance".
1
Press the POSITION (
) key once to move in the
desired direction.
Tool carriage or the media will move toward the direction of the pressed
POSITION key for 1 step.
Continuously move manually
It can manually move continuously when the screen is displaying "READY", or when the POSITION ( )
keys are displayed.
Operation
Supplement
Pressing the POSITION and [SLOW] keys at the
same time will move the tool carriage slower.
1
Hold the POSITION (
) key down to keep moving in the
desired direction.
Tool carriage or the media keeps on moving continuously in the direction
of the pressed POSITION key.
2
Release the POSITION (
) key.
Movement of the tool carriage or the media will stop.
To Next Page
Loading...
