13-16
4
Press the [3] key (HP-GL SEPARATOR).
HP-GL SEPARATOR screen is displayed.
Supplement
You can set to "IN", "DF", "PS", "IW", "SC", "IP",
"SP", "NR", "PG", "AH", "AF" or "-".
When set to "-", cross cut by separator is not
performed.
5
Press the POSITION ( ) keys to change the setting.
Supplement
It will return to INTERFACE screen (4/4) without
changing the settings when you press the [ESC]
key (CANCEL).
6
&RQÀUPWKHVHWWLQJDQGSUHVVWKH>(17(5@NH\6(7
6HWWLQJZLOOEHFRQÀUPHGDQGLWZLOOUHWXUQWR,17(5)$&(VFUHHQ
7
Press the [PAUSE/MENU] key.
It will return to default screen.
To Next Page
Loading...
