GRAPHTEC FC9000-140 - Page 349

16-27
5
Press the [1] to [4] keys to see the contents of the error.
Error message corresponding to the pressed key is displayed.
Supplement
Press the POSITION ( ) key in the screen of
step 4 as necessary and repeat steps 5 and 6
if there are multiple error messages you would
like to see
6
Press the [ENTER] key (CONFIRM) when the error message
LVFRQÀUPHG
It will return to ERROR MESSAGES screen.
7
Press the [PAUSE/MENU] key.
It will return to default screen.