GSE Scale Systems - 91
Chapter 10 Tare Operations Technical Reference Manual
Chapter 10
Tare Operations
10.1 Tare Operations Parameter Setup
P161.XX TrSAV
Determine whether or not you want to save the tare
weight value upon power-down.
This feature will prove to be valuable in applications
such as Tank Weighing (remote scale). If power is
removed from the meter while the tank contains material,
the net value will not be lost if the unit is set for "Tare
Saved".
P162.XX TrNEG
Enables bi-directional operation by permitting a negative
tare. This should be used only if required for a specific
application.
P163.XX TrRND
This parameter will select whether or not the Tare
Weight will be rounded off for calculations. If the
application must be NIST approved, this must be set to
P163.00 which guarantees that Net + Tare = Gross.
SECTION - 10.1
Figure 16 Tare Key
To Next Page
Loading...