GSE Scale Systems - 213
Chapter 20 Database (OPTION) Technical Reference Manual
upon P503 for 12 or 24 hour format, and upon
P510 for USA or International date format.
The width of time / date is 20 characters for 12
hour format and 17 characters for 24 hour
format.
f. The width of the six alpha-numeric IDs will be
the maximum size as set in their respective
setup modes, P700 through P710.
g. Every 55 lines a form-feed, (ASCII 12, $0C)
character will be sent. Immediately afterward,
the headings will be re-sent also. Also, after
the last record another form-feed will be sent.
Refer to the following sample printout for an
example of the format used for printing a
database.
20.11 DOWN-LOAD FORMAT
The "Down-load" selection, command 13, is used to
transmit the contents of one of the instrument's databases
in a comma delimited, ASCII file. This format is
suitable for uploading the information into a computer's
database or spreadsheet or for transmitting to another
GSE 500 series instrument using the "Up-load" selection.
The following rules describe the format of the down-
loaded data:
a. Each column is separated by a comma.
b. Each record is terminated by a carriage return
and line feed.
c. Alpha-numeric parameters (ID 1 through 6) are
enclosed in quotes ("").
d. All parameters are sent in a minimum width
format, with no leading or trailing zeros or
spaces.
e. After the data for all of the stored rows has
been sent, the end of the transmission is
indicated by the transmission of a row with
only "ENDofDB" (without quote marks).
Part# Description: FinalWt. Max %Error Tm/Dt
12-345-67 Transistor 0 0 04:39:23 pm 03/31/92
32-20-3929 Capacitor 0 0 08:06:08 am 03/31/92
398-002 Resistor 0 0 08:06:28 am 03/31/92
939-9-321 Diode 0 0 08:06:50 am 03/31/92
24-3456-78 Microprocessor 0 0 11:02:59 am 03/31/92
Figure 32, Sample Database Printout
SECTION - 20.10
CAUTION:
All electrical connections and access to the inside of
the indicator enclosure should be performed by
qualified service personnel only!
To Next Page
Loading...