GSE Scale Systems - 129
Chapter 15 Communications Technical Reference Manual
if the parameter name is transmitted, it is always sent
following the data. The length of the parameter name
will always be 5 characters for these parmeters as this is
the same name that is displayed when the parameter is
selected during the Weigh Mode. If a more descriptive
name is desired it can be programmed into the Custom
Transmit Setup to be part of the fixed text transmission
immediately preceding or following the data being
transmitted.
STATUS PARAMETER
This parameter was added so that the instrument could
transmit some information regarding its status,
specifically concerning motion and overload conditions.
The transmitted status will consist of a single character
having three possible values as described in table 25
Status Character Interpretation. The only appliciable
format code for the status parameter is for the inclusion
or exclusion of the parameter's name, Stat, which has a
format code of 128, as shown in table 26 Status Format
Selection.
<ID> Key Usage in the VAR modes (update)
The <ID> key is now operational while in the var modes
(viewing vars 0 thru 9). The only modes in which the
<ID> key will not perform the operation as specified in
P720 are modes 91 - 94, which are the General Purpose
Registers.
SECTION - 15.7
selection Example Description
1 "06:56:51 pm 05/15/93" Includes seconds with time
2 "18:56 05/15/93" 24 hour time format
4 "06:56 pm May 15, 1993" Print date spelled out
8 "06:56 pm Wed 15, 1993" Print day of week
16 "06:56 pm 15/05/93" International date format
32 "710123456"
Print as # of seconds elapsed since midnight January 1, 1970
64 "05/15/92" Do NOT print time
128 "06:56 pm" Do NOT print date
Table 20 Time / Date Format Selections
Format Example Description
32 "710123456" Print as # of seconds elapsed since midnight January 1, 1970
68 "May 6, 1992" Complete U.S.A. date
72 "Mon 05/06/92" U.S.A. date with day of the week
80 "06/05/92" International date
92 "Mon 6 May, 1992" Complete International date with the day of the week
129 "01:11:30 pm" 12 hour time with seconds, without the date
131 "13:11:30" 24 hour time with seconds
Table 21 Time / Date Format examples
To Next Page
Loading...