Model 574 Programmable Counting System (PCS)
100 - GSE Scale Systems
or register had not been named. If it is desirable to have
the variable name five characters or less, simply add a
(space) to the sixth character name location. No matter
what character length is specified it will be used as the
column name if the parameter is specified as a column in
a database. Refer to chapter 20 Database (option) for
more information on setting Weighing/Counting
parameters, VARS, REGS and ID"s as column headings.
Naming Time/Date Parameter (P611)
P611. - - Tm/Dt
Accessing this parameter sets the "naming" for the Time/
Date parameter.
14.4 Truck Parameters
Truck parameters can be custom named, making their
intended usage more specific to the scale user. These
parameters are pre-named for standard truck weighing
purposes. Some applications might require a custom
name. The name can be any length so as it does not
exceed 49 characters. The name length greater than ten
characters is fine if its sent to a printer. Only the first ten
characters will be displayed in the ten character auxiliary
display (2-lines, 5x7 dot matrix) when the data entry
mode is accessed. If the name is five characters or less in
length, the bottom line (five characters) of the ten
character auxiliary display will still show the word
"value". This is part of the default name as it would be
displayed if the variable or register had not been named.
If it is desirable to have the variable name five characters
or less, simply add a (space) to the sixth character name
location. No matter what character length is specified it
will be used as the column name if the parameter is
specified as a column in a database. Refer to chapter 20
Database (option) for more information on setting
Weighing/Counting parameters, VARS, REGS and ID"s
as column headings.
Naming Truck Weighing Parameters (P612-P614)
P612. - - TrGrs
Accessing this parameter sets the "naming" for the Truck
Gross parameter.
P613. - - TrNet
Accessing this parameter sets the "naming" for the Truck
Net parameter.
P614. - - TrTar
Accessing this parameter sets the "naming" for the Truck
Tare parameter.
14.5 Counting Parameters
Counting parameters can be custom named, making their
intended usage more specific to the scale user. These
parameters are pre-named for standard counting
purposes. Some applications might require a custom
name. The name can be any length so as it does not
exceed 49 characters. The name length greater than ten
characters is fine if its sent to a printer. Only the first ten
characters will be displayed in the ten character auxiliary
display (2-lines, 5x7 dot matrix) when the data entry
mode is accessed. If the name is five characters or less in
length, the bottom line (five characters) of the ten
character auxiliary display will still show the word
"value". This is part of the default name as it would be
displayed if the variable or register had not been named.
If it is desirable to have the variable name five characters
or less, simply add a (space) to the sixth character name
location. No matter what character length is specified it
will be used as the column name if the parameter is
specified as a column in a database. Refer to chapter 20
Database (option) for more information on setting
Weighing/Counting parameters, VARS, REGS and ID"s
as column headings.
Naming Counting Parameters (P630-P637)
P630. - - Qty
Accessing this parameter sets the "naming" for the
Quantity parameter.
P631. - - QtTOT
Accessing this parameter sets the "naming" for the
Quantity Total parameter.
P632. - - QtT+C
Accessing this parameter sets the "naming" for the
Quantity Total plus Current Quantity parameter.
P633. - - QtT-C
Accessing this parameter sets the "naming" for the
Quantity minus Current Quantity parameter.
P634. - - APW
Accessing this parameter sets the "naming" for the
Average Piece Weight parameter.
P635. - - APW*K
Accessing this parameter sets the "naming" for the
Average Piece Weight times 1000 parameter.
To Next Page
Loading...