GSE 574 - Page 57

Model 574 Programmable Counting System (PCS)
38 - GSE Scale Systems
PARAMETER # SELECTION DESCRIPTION
ID PARAMETERS
AND
TRUCK IN/OUT
WEIGHING
P700.- -idSIZE * #1=12 Determine whether or not the
ID will be used,
and, if used, its size. If set to
zero, ID is not used
the corresponding odd-
numbered parameter
that will provide the name will
not appear.
P701.- -NAME1 * None! Appears only if size P700 is
1 or greater
P702.- -idSIZE * #2= 0 See P700 above.
P704.- -idSIZE * #3= 0 See P700 above.
P706.- -idSIZE * #4= 0 See P700 above.
P708.- -idSIZE * #5= 0 See P700 above
P710.- -idSIZE * #6= 0 See P700 above
P720.00 iduse * Std. Determines whether ID use is
standard or for
P720.01 Truck Truck In/Out Weighing.
P721.00 iduse * Seq'n Specifies the type of ID
number that will be used
P721.01 Smal# to reference the stored truck
weight if Truck #In/Out
Weighing is used.
P721.02 Big
Only Small and
P721.03ID #6 Big # permit storage of Tare
Weights.