GW Instek PEL-3000 Series - OPP Test Automation

FUNCTION MENU
149
Results:
Power Source
OCP tripped
OCPRS232
01/Oct/2018
OCP Test
7.498
V
0.0000
A
0.00
W
Set Curr: Fetch Volt:
2.000
1.500
1.000
6.91
6.92
6.91
Indicating power supply
OCP was tripped.
Current：
Step current setting on the load
when the power supply’s OCP
was tripped.
2.500A
The OCP Test will return the current setting of the
last step when the power supply’s OCP was
tripped.
Power Source
OCP time out
OCPRS232
01/Oct/2018
OCP Test
7.498
V
0.0000
A
0.00
W
Set Curr: Fetch Volt:
2.000
1.500
1.000
6.91
6.92
6.91
OCP time out
OCP time out indicates that the
power supply OCP was not
tripped.
OCP time out will occur if the power supply’s OCP
fails to trigger. This is determined when the
measured voltage is less than Trig V and the
measured current is greater than End C.