H3C S3100V2-52TP

108
To do… Use the command… Remarks
Create a class and enter class view
traffic classifier tcl-name [ operator
{ and | or } ]
Required
By default, no traffic class exists.
Configure match criteria if-match match-criteria
Required
By default, no match criterion is
configured in a traffic class.
NOTE:
For more information about the traffic classifier and if-match commands, see
ACL and QoS Command
Reference .
Configuring traffic mirroring of different types
NOTE:
In a traffic behavior, you can configure only one type of traffic mirroring.
Mirroring traffic to a port
Follow these steps to mirror traffic to an interface:
To do… Use the command… Remarks
Enter system view system-view —
Create a behavior and enter
behavior view
traffic behavior
behavior-name
Required
By default, no traffic behavior exists.
Specify the destination interface
for traffic mirroring
mirror-to interface
interface-type
interface-number
Required
By default, traffic mirroring is not
configured in a traffic behavior.
NOTE:
For more information about the traffic behavior command, see
ACL and QoS Command Reference .
Mirroring traffic to the CPU
Follow these steps to mirror traffic to the CPU:
To do… Use the command… Remarks
Enter system view system-view —
Create a behavior and enter
behavior view
traffic behavior
behavior-name
Required
By default, no traffic behavior exists.
Mirror traffic to the CPU mirror-to cpu
Required
By default, no traffic mirroring is
configured in a traffic behavior.
NOTE:
• For more information about the traffic behavior command, see
ACL and QoS Command Reference .
• The CPU refers to the CPU of the device where ports with traffic mirroring configured reside.