H3C S3100V2-52TP User Manual

52
To do… Use the command… Remarks
Display the information about each
output destination
display info-center [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the state of the log buffer
and the log information recorded
display logbuffer [ reverse ] [ level severity |
size buffersize | slot slot-number ] * [ | { begin |
exclude | include } regular-expression ]
Available in any view
Display a summary of the log
buffer
display logbuffer summary [ level severity | slot
slot-number ] * [ | { begin | exclude | include }
regular-expression ]
Available in any view
Display the content of the log file
buffer
display logfile buffer [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the configuration of the log
file
display logfile summary [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the state of the trap buffer
and the trap information recorded
display trapbuffer [ reverse ] [ size buffersize ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Reset the log buffer reset logbuffer Available in user view
Reset the trap buffer reset trapbuffer Available in user view
Information center configuration examples
Outputting log information to a UNIX log host
Network requirements
• Send log information to a UNIX log host with an IP address of 1.2.0.1/16;
• Log information with severity higher than or equal to informational will be output to the log host;
• The source modules are ARP and IP.
Figure 18 Network diagram
Configuration procedure
Before the configuration, make sure that there is a route between Device and PC.
1. Configure the device
# Enable information center.
<Sysname> system-view
[Sysname] info-center enable
# Specify the host with IP address 1.2.0.1/16 as the log host. Use channel loghost to output log
information (optional, loghost by default), and use local4 as the logging facility.
[Sysname] info-center loghost 1.2.0.1 channel loghost facility local4

H3C S3100V2-52TP Specifications

General

Brand	H3C
Model	S3100V2-52TP
Category	Switch
Language	English