H3C S3100V2-52TP

44
To do… Use the command… Remarks
Configure the channel
through which system
information can be output
to the trap buffer and
specify the buffer size
info-center trapbuffer [ channel
{ channel-number | channel-name } |
size buffersize ] *
Optional
By default, system information is output
to the trap buffer through channel 3
(known as trapbuffer) and the default
buffer size is 256.
Configure the output rules
of the system information
info-center source { module-name |
default } channel { channel-number |
channel-name } [ debug { level severity
| state state } * | log { level severity |
state state } * | trap { level severity |
state state } * ] *
Optional
See “Default output rules of system
informa
tion.”
Configure the format of the
time stamp
info-center timestamp { debugging |
log | trap } { boot | date | none }
Optional
The time stamp format for log, trap and
debugging information is date by
default.
Outputting system information to the log buffer
NOTE:
The log buffer accepts only log and debuggin
g
information; it discards trap information even if you have
configured to output it to the log buffer.
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default.
Name the channel with a
specified channel number
info-center channel channel-number
name channel-name
Optional
See Table 2 for default channel names.
Configure the channel
through which system
information can be output
to the log buffer and
specify the buffer size
info-center logbuffer [ channel
{ channel-number | channel-name } |
size buffersize ] *
Optional
By default, system information is output
to the log buffer through channel 4
(known as logbuffer) and the default
buffer size is 512.
Configure the output rules
of the system information
info-center source { module-name |
default } channel { channel-number |
channel-name } [ debug { level severity
| state state } * | log { level severity |
state state } * | trap { level severity |
state state } * ] *
Optional
See “Default output rules of system
informa
tion.”
Configure the format of the
time stamp
info-center timestamp { debugging |
log | trap } { boot | date | none }
Optional
The time stamp format for log, trap and
debugging information is date by
default.