H3C S3100V2-52TP User Manual

42
To do… Use the command… Remarks
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel channel-number
name channel-name
Optional
See Table 2 for
default channel names.
Configure the channel
through which system
information can be output
to a monitor terminal
info-center monitor channel
{ channel-number | channel-name }
Optional
By default, system information is output to
the monitor terminal through channel 1
(known as monitor).
Configure the output rules
of the system information
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap { level
severity | state state } * ] *
Optional
See “Default output rules of system
informa
tion.”
Configure the format of the
time stamp
info-center timestamp { debugging
| log | trap } { boot | date | none }
Optional
By default, the time stamp format for log,
trap and debugging information is date.
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to enable the associated
display function in order to display the output information on the monitor terminal.
Follow these steps to enable the display of system information on a monitor terminal:
To do… Use the command…
Remarks
Enable the monitoring of system
information on a monitor terminal
terminal monitor
Required
Enabled on the console and disabled on the
monitor terminal by default.
Enable the display of debugging
information on a monitor terminal
terminal debugging
Required
Disabled by default
Enable the display of log
information on a monitor terminal
terminal logging
Optional
Enabled by default
Enable the display of trap
information on a monitor terminal
terminal trapping
Optional
Enabled by default
Outputting system information to a log host
To do… Use the command… Remarks
Enter system view system-view —
Enable information center info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
See Table 2 for default channel names.

H3C S3100V2-52TP Specifications

General

Brand	H3C
Model	S3100V2-52TP
Category	Switch
Language	English