H3C S3100V2-52TP User Manual

135
To do… Use the command… Remarks
Configure the interval
between two consecutive
tests for a test group
frequency interval
Optional
By default, the interval between two
consecutive tests for a test group is 0
milliseconds. Only one test is performed.
If the last test is not completed when the interval
specified by the frequency command is
reached, a new test does not start.
Configure the number of
probe operations to be
performed in one test
probe count times
Optional
By default, one probe operation is performed
in one test.
Not available for voice tests, Only one probe
operation can be performed in one voice test.
Configure the NQA probe
timeout time
probe timeout timeout
Optional
By default, the timeout time is 3000
milliseconds.
Not available for UDP jitter tests.
Configure the maximum
number of hops a probe
packet traverses in the
network
ttl value
Optional
20 by default.
Not available for DHCP tests.
Configure the ToS field in
an IP packet header in an
NQA probe packet
tos value
Optional
0 by default.
Not available for DHCP tests.
Enable the routing table
bypass function
route-option bypass-route
Optional
Disabled by default.
Not available for DHCP tests.
Configuring a schedule for an NQA test group
You can configure a schedule for an NQA test group by setting the start time and test duration for a test
group.
A test group performs tests between the scheduled start time and the end time (the start time plus test
duration). If the scheduled start time is ahead of the system time, the test group starts testing immediately.
If both the scheduled start and end time are behind the system time, no test will start. To view the current
system time, use the display clock command.
Configuration prerequisites
Before you configure a schedule for an NQA test group, complete the following tasks:
• Configure test parameters required for the test type.
• Configure the NQA server for tests that require cooperation with the NQA server.
Scheduling an NQA test group
Follow these steps to configure a schedule for an NQA test group:

H3C S3100V2-52TP Specifications

General

Brand	H3C
Model	S3100V2-52TP
Category	Switch
Language	English