EasyManuals Logo

H3C S3100V2-52TP User Manual

H3C S3100V2-52TP
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #208 background imageLoading...
Page #208 background image
196
11. The CPE closes the connection.
After this, the CPE will initiate a connection to the standby ACS.
CWMP configuration tasks
Configuring the DHCP server
In a CWMP network, the DHCP server is mainly used to notify the ACS location and authentication
information to the ACS. DHCP server configuration includes the following tasks:
• Configuring a DHCP address pool for allocating IP addresses to CPEs.
• Configuring the DNS server.
• Configuring the Option 43 field to notify the ACS information to CPEs.
The following describes how to configure the option 43 field:
You can configure ACS parameters for the CPE on the DHCP server through DHCP Option 43. When
accessed by the CPE, the DHCP server sends the ACS parameters in DHCP Option 43 to the CPE. If the
DHCP server is an H3C switch that supports DHCP Option 43, you can configure the ACS parameters
at the CLI with the command option 43 hex 01length URL username password, where
• length is a hexadecimal string that indicates the total length of the URL username password
arguments. No space is allowed between the 01 keyword and the length value.
• URL is the ACS address.
• username is the ACS username.
• password is the ACS password.
When configuring the ACS URL, username and password, follow these guidelines:
• The three arguments take the hexadecimal format and the ACS URL and username must each end
with a space (20 in hexadecimal format) for separation.
• The three arguments must be input in 2-digit, 4-digit, 6-digit, or 8-digit segments, each separated by
a space.
For example, to set the ACS address to http://169.254.76.31:7547/acs, username to 1234 , and
password to 5678, you can configure as follows:
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] option 43 hex 0127 68747470 3A2F2F31 36392E32 35342E37 362E3331
3A373534 372F6163 73203132 33342035 3637 38
In the option 43 hex command,
• 27 indicates that the length of the subsequent hexadecimal strings is 39 characters.
• 68747470 3A2F2F31 36392E32 35342E37 362E3331 3A373534 372F6163 73 corresponds to
the ACS address http://169.254.76.31/acs.
• 3132 3334 corresponds to the username 123 4.
• 35 3637 38 corresponds to the password 5678.
• 20 is the end delimiter.

Table of Contents

Other manuals for H3C S3100V2-52TP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3100V2-52TP and is the answer not in the manual?

H3C S3100V2-52TP Specifications

General IconGeneral
BrandH3C
ModelS3100V2-52TP
CategorySwitch
LanguageEnglish

Related product manuals