73
MIB style configuration
Overview
MIBs fall into public MIBs and private MIBs. A private MIB is attached to a sub-node under the
enterprises MIB node (1.3.6.1.4.1). The H3C private MIB has two styles: the H3C compatible MIB style
and the H3C new MIB style:
• In the H3C compatible MIB style, the device public MIB is under the H3C’s enterprise ID 25506,
and the private MIB is under the enterprise ID 2011.
• In the H3C new MIB style, both the device public MIB and the private MIB are under the H3C’s
enterprise ID 25506.
These two styles of MIBs implement the same management function. Your device comes with a MIB
loaded but the MIB style depends on the switch model. You can change the MIB style as needed, but
must make sure that the device is using the same MIB style as the NMS.
Setting the MIB style
Follow these steps to set the MIB style:
To do… Use the command… Remarks
Enter system view system-view —
Set the MIB style mib-style [ compatible | new ]
Optional
new by default.
NOTE:
After changing the MIB style, reboot the device to validate the change.
Displaying and maintaining MIB style
To do… Use the command… Remarks
Display the MIB style
display mib-style [ | { begin | exclude |
include } regular-expression ]
Available in any view
To Next Page
Loading...
Need help?
General
