72
Table 7 SNMP log message field description
Field Description
Jan 1 02:49:40:566 2011 Time when the SNMP log was generated.
seqNO Serial number automatically assigned to the SNMP log, starting from 0.
srcIP IP address of the NMS.
op SNMP operation type (GET or SET).
node MIB node name and OID of the node instance.
erroIndex Error index, with 0 meaning no error.
errorStatus Error status, with noError meaning no error.
value
Value set by the SET operation (this field is null for a GET operation).
If the value is a character string that has characters beyond the ASCII range
0 to 127 or invisible characters, the string is displayed in hexadecimal
format, for example, value = <81-43>[hex].
NOTE:
The information center can output system event messages to several destinations, including the terminal
and the log buffer. In this example, SNMP log messages are output to the terminal. To configure other
message destinations, see the chapter “Information center configuration.”
To Next Page
Loading...
Need help?
General
