113
# Create ACL 3001 to allow packets sent from the technology department (on subnet 192.168.2.0/24)
to the marketing department (on subnet 192.168.1.0/24).
[DeviceA] acl number 3001
[DeviceA-acl-adv-3001] rule permit ip source 192.168.2.0 0.0.0.255 destination
192.168.1.0 0.0.0.255 time-range work
[DeviceA-acl-adv-3001] quit
# Create traffic class mkt_c, and configure the match criterion as ACL 3001.
[DeviceA] traffic classifier mkt_c
[DeviceA-classifier-mkt_c] if-match acl 3001
[DeviceA-classifier-mkt_c] quit
# Create traffic behavior mkt_b, and configure the action of mirroring traffic to port Ethernet 1/0/3.
[DeviceA] traffic behavior mkt_b
[DeviceA-behavior-mkt_b] mirror-to interface Ethernet 1/0/3
[DeviceA-behavior-mkt_b] quit
# Create QoS policy mkt_p, and associate traffic class mkt_c with traffic behavior mkt_b in the QoS
policy.
[DeviceA] qos policy mkt_p
[DeviceA-qospolicy-mkt_p] classifier mkt_c behavior mkt_b
[DeviceA-qospolicy-mkt_p] quit
# Apply QoS policy mkt_p to the outgoing packets of Ethernet 1/0/2.
[DeviceA] interface Ethernet 1/0/2
[DeviceA-Ethernet1/0/2] qos apply policy mkt_p outbound
3. Verify the configurations
After completing the configurations, through the server, you can monitor all traffic sent by the technology
department to access the Internet and the IP traffic that the technology department sends to the marketing
department during working hours.
To Next Page
Loading...
Need help?
General
