EasyManua.ls Logo

H3C S3100V2-52TP

H3C S3100V2-52TP
224 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
185
(Please confirm in 30 seconds, default No). (Y/N)
N
# Enable management VLAN auto-negotiation.
[abc_0.SwitchB-cluster] management-vlan synchronization enable
# Configure the holdtime of the member switch information as 100 seconds.
[abc_0.SwitchB-cluster] holdtime 100
# Configure the interval to send handshake packets as 10 seconds.
[abc_0.SwitchB-cluster] timer 10
# Configure the FTP Server, TFTP Server, Log host and SNMP host for the cluster.
[abc_0.SwitchB-cluster] ftp-server 63.172.55.1
[abc_0.SwitchB-cluster] tftp-server 63.172.55.1
[abc_0.SwitchB-cluster] logging-host 69.172.55.4
[abc_0.SwitchB-cluster] snmp-host 69.172.55.4
# Add the switch whose MAC address is 000f-e201-0013 to the blacklist.
[abc_0.SwitchB-cluster] black-list add-mac 000f-e201-0013
[abc_0.SwitchB-cluster] quit
# Add port Ethernet 1/0/1 to VLAN 2, and configure the IP address of VLAN-interface 2.
[abc_0.SwitchB] vlan 2
[abc_0.SwitchB-vlan2] port ethernet 1/0/1
[abc_0.SwitchB] quit
[abc_0.SwitchB] interface vlan-interface 2
[abc_0.SwitchB-Vlan-interface2] ip address 163.172.55.1 24
[abc_0.SwitchB-Vlan-interface2] quit
# Configure VLAN-interface 2 as the network management interface.
[abc_0.SwitchB] cluster
[abc_0.SwitchB-cluster] nm-interface vlan-interface 2

Table of Contents

Other manuals for H3C S3100V2-52TP

Related product manuals