134
7000056136-0
EN
6.3 - Water supply
6.3.1 - Fresh water
Fault Cause Action / Solution
Presence of fresh water
in the vehicle.
Leakage problem. Locate and repair the leak.
No water from the tap
or shower.
Fresh water tank
empty.
Check and close the drain
valve if necessary.
Fill the tank with fresh
water.
No electrical power
supply.
Check the electrical power
supply on the control
panel.
The 10-A water pump
fuse is faulty.
Replace the fuse.
Faulty water pump. Contact HANROAD
Customer Service.
The fresh water level
displayed on the
control panel does not
match the actual level
in the tank.
Faulty level
measurement probe.
Contact HANROAD
Customer Service.
6.3.2 - Waste water
Fault Cause Action / Solution
Presence of dirty water in
the vehicle.
Leakage problem. Locate and repair the leak.
The tank is not draining. Blocked drain
valve.
Contact HANROAD Customer
Service.
The waste water level
displayed on the control
panel does not match the
actual level in the tank.
Faulty level
measurement
probe.
Contact HANROAD Customer
Service.