HANROAD TREK4 - Sliding Bench

93
7000056136-0
EN
■ Actuate the red lever (2) located under the seat.
■ Swivel the seat.
When the vehicle is running, the seat must be facing the direction
of forward travel and locked for normal use of the seat belt.
Driver seat
C
B
A
B
1
2
2
1 Driver seat
2 Seat rotation lever
■ Release the handbrake.
■ Tilt the backrest fully forwards.
■ Centre the driver seat (1) on its guide rail.
■ Open the door.
■ Actuate the red lever (2) located under the seat.
■ Swivel the driver seat (1).
■ Apply the handbrake.
When the vehicle is running, the seat must be facing the direction
of forward travel and locked for normal use of the seat belt.
5.1.2 - Sliding bench
Before moving the bench, check on the oor and in the guide rails
that there are no obstacles to prevent its travel.
Lock the drawers and cupboard to prevent damage when sliding and
tilting the bench seat (see page 83).
B
A
2
1
1 Lever
2 Latch
■ Press the lever (1) and then pull the latch (2) to unlock the bench.
B
A
1
2
2
1 Lever
2 Strap
■ Use the straps to move the bench into the desired position.
■ Pull both straps uniformly to move the bench parallel to the kitchen unit.