HDG Lambda-Control 1 plus - Wood Boiler; Information; Operating Data

22
4 Wood Boiler
The menu “Wood Boiler” is located in the “Selection” menu. Its submenus are described below.
4.1 Information
The information menu contains submenus with similar information.
4.1.1 Operating data
Selection
Wood Boiler
Wood Boiler
Accumulator
Information
Information
Date – Time
Settings
Operating data
Operating data
DCF77-Receiver
Chimney sweep
Operations counter
Boiler ON
Pellet/Oil/Gas
Calibrate O
2
*
Aggregates
Boiler set ---.-°C
Sys. operation mode
Aggregate test*
Commissioning
Boiler temp. ---.-°C
System
Last error
Return set ---.-°C
Password
Last note
Return temp. ---.-°C
Delete values
Output set ---.-kW
Output ---.-kW
Flue gas set ---.-°C
Flue gas temp. ---.-°C
O
2
set --.-%
O
2
--.-%
CO
2
--.-%
Lambda (λ) --.--
Efficiency ---.-%
Difference KV-KR --.-K
Flue gas max. ---.-°C
Boiler OFF appr. TT --:--
Heating date* TT --:--
Refuel amount* --.-%
◄ Call up Selection menu
▲▼ Select Wood Boiler
◄ Confirm selection
► Leave menu
▲▼ Select Information
◄ Confirm selection
► Leave menu
▲▼ Select Operating data
◄ Confirm selection
► Leave menu
▲▼ Browse menu
► Leave menu
*only displayed in operating status “Boiler OFF“
Boiler ON
Wood boiler operating status: “OFF” / “ON” / “Service” / “Fill” / “READY” / “Refuel” / “Ignition” / “Run” /
“Overtemp.” / “Error”.
Boiler set ---.-°C
Boiler temperature - set value.
Boiler temp. ---.-°C
Boiler temperature - actual value. (current value)
Return set ---.-°C
Return temperature - set value.
Return temp. ---.-°C
Return temperature - actual value. (current value)
Output set ---.-kW
Boiler output - set value. requires the Technician password
Output ---.-kW
Boiler output - actual value. (current value) — requires the Technician password
Flue gas set ---.-°C
Flue gas temperature - set value.
Flue gas temp. ---.-°C
Flue gas temperature - actual value. (current value)
O
2
Set --.-%
Set value of oxygen in flue gas.