HDG Lambda-Control 1 plus - Chimney Sweep

47
8.2.4 Chimney sweep
The submenu "Chimney sweep" contains two tests.
Selection
…
Pellet/Oil/Gas
Pellet/Oil/Gas
…
Information
Operation mode
Settings
Chimney sweep
Chimney sweep
Chimney sweep test
STB test
◄ Call up Selection menu
▲▼ Select Pellet/Oil/Gas
◄ Confirm selection
► Exit menu
▲▼ Select Chimney sweep
◄ Confirm selection
► Exit menu
▲▼ Select menu item
◄ Confirm selection
▲▼ Change value
◄ Confirm value
► Exit menu
Chimney sweep test
Pellet/Oil/Gas
…
Chimney sweep test
Chimney sweep test
…
Remaining time --min
Boiler temp. --.-°C
◄ Call up Pellet/Oil/Gas menu
▲▼ Select Chimney sweep test
◄ Confirm selection
► Exit menu
► Abort test
STB test
Pellet/Oil/Gas
…
STB test
STB test
…
Remaining time --min
Boiler temp. --.-°C
◄ Call up Pellet/Oil/Gas menu
▲▼ Select STB test
◄ Confirm selection
► Exit menu
► Abort test